Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Link Aggregation Configuration
Procedure
- Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] | brief ] command to check the Eth-Trunk configuration.
- Run the display eth-trunk membership trunk-id command to check information about Eth-Trunk member interfaces.
- Run the display load-balance profile [ profile-name ] command to check the load balancing profile of the Eth-Trunk.
- Run the display forward eth-trunk mode command to check the number of LAGs supported by the device.