Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the LAG Operating
Context
During routine maintenance, run the following commands in any view to check the LAG operating status.
Procedure
- Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] | brief ] command to check the Eth-Trunk configuration.
- Run the display lacp statistics eth-trunk [ trunk-id [ interface interface-type interface-number ] ] command to check the statistics about LACPDUs sent and received in LACP mode.
- Run the display interface eth-trunk [ trunk-id ] command to check the Eth-Trunk status.
- Run the display eth-trunk membership trunk-id command to check information about member interfaces of an Eth-Trunk.
