Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for VLANs
This section only provides configuration examples for individual features. For details about multi-feature configuration examples, feature-specific configuration examples, interoperation examples, protocol or hardware replacement examples, and industry application examples, see the Typical Configuration Examples.
- Example for Assigning VLANs Based on Ports
- Example for Assigning VLANs Based on MAC Addresses
- Example for Assigning VLANs Based on IP Subnets
- Example for Implementing Inter-VLAN Communication Using VLANIF Interfaces
- Example for Configuring a Dot1q Termination Layer 3 Sub-interface to Implement Communication Across a Layer 3 Network
- Example for Configuring VLAN Aggregation
- Example for Configuring the MUX VLAN on the Access Layer Device
- Example for Configuring the MUX VLAN on the Aggregation Device
- Example for Configuring Transparent Transmission of Protocol Packets in a VLAN