Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting RSTP Parameters That Affect RSTP Convergence
Pre-configuration Tasks
Before configuring RSTP parameters that affect RSTP convergence, configure basic RSTP functions. RSTP supports link type and fast transition configuration on ports to implement rapid convergence.
- Setting the RSTP Network Diameter
- Setting the RSTP Timeout Interval
- Setting RSTP Timers
- Configuring the Maximum Number of Connections in an Eth-Trunk that Affects Spanning Tree Calculation
- Configuring the Link Type for a Port
- Configuring the Maximum Transmission Rate of an Interface
- Switching to the RSTP Mode
- Configuring Edge Ports and BPDU Filter Ports
- Verifying the STP/RSTP Configuration