Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring M-LAG Through V-STP (Recommended)
V-STP virtualizes the M-LAG master and backup devices enabled with STP into one device to perform STP calculation.
- Configuring V-STP
- Configuring a DFS Group
- (Optional) Configuring STP Multi-Process
- Configuring M-LAG Consistency Check
- Configuring an Interface as a Peer-link Interface
- Configuring an M-LAG Member Interface
- (Optional) Configuring the Dual-Active Gateway
- (Optional) Configuring the Interface Status When the Peer-Link Fails
- (Optional) Enabling Enhanced M-LAG Layer 3 Forwarding
- Verifying the Configuration of M-LAG Configured Through V-STP