Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VBST Configuration
This chapter describes how to configure VLAN-based Spanning Tree (VBST). VBST is a spanning tree protocol developed by Huawei. It constructs a spanning tree in each VLAN to load balance traffic from different VLANs, improving link use efficiency.
- Overview of VBST
- Understanding VBST
- Application Scenarios for VBST
- Summary of VBST Configuration Tasks
- Licensing Requirements and Limitations for VBST
- Default Settings for VBST
- Configuring Basic VBST Functions
- Setting VBST Parameters That Affect VBST Convergence
- Configuring Protection Functions of VBST
- Setting Parameters for Interworking Between a Huawei Datacom Device and a Non-Huawei Device
- Maintaining VBST
- Configuration Examples for VBST