Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Traffic Statistics
Networking Requirements
As shown in Figure 10-1, the tenant device is connected to the external network device through the Switch on the data center network. 802.1p priorities of storage service packets and data service packets are 6 and 2 respectively. The tenant requires that statistics on storage service packets be collected to determine bandwidth allocation.
Service Deployment
- Configure a traffic classifier to match packets with the 802.1p priority of 6 so that the device differentiates storage service packets.
- Configure a traffic behavior and define traffic statistics in the traffic behavior.
- Configure a traffic policy, bind the traffic classifier and traffic behavior to the traffic policy, and apply the traffic policy to the inbound direction of the switch so that the device collects statistics on storage service packets.