Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Outbound Interface-based Rate Limiting
Context
To control the rate of all outgoing traffic on an interface, configure outbound interface-based rate limiting.
When the outgoing traffic rate on an interface exceeds the alarm threshold, an alarm is generated.
Procedure
- Run system-view
The system view is displayed.
- Run interface interface-type interface-number
The interface view is displayed.
- Run qos lr cir cir-value [ kbps | mbps | gbps ] [ cbs cbs-value [ bytes | kbytes | mbytes ] ] [ outbound ]
Outbound interface-based rate limiting is configured.
By default, the rate limit on an interface is the maximum bandwidth of the interface.
- Run quit
Return to the system view.
- Run commit
The configuration is committed.