Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Synchronization Between LDP and IGP
Procedure
- Run the display mpls ldp command to check the global LDP configuration.
- Run the display ospf [ process-id ] ldp-sync interface { all | interface-type interface-number } command to check information about synchronization between LDP and OSPF on an interface.
- Run the display isis [ process-id ] ldp-sync interface command to check information about synchronization between LDP and IS-IS on the interface.