Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Static Routes
Procedure
Static routes in an MPLS TE tunnel are similar to common static routes. You only need to configure a static route with a TE tunnel interface as the outbound interface. For detailed instructions, see Configuring IPv4 Static Routes in the CloudEngine 12800 and 12800E Series Switches Configuration Guide - IP Unicast Routing.