Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS TE Configuration
This chapter describes how to configure MPLS TE tunnels that transmit MPLS L2VPN (VLL) services and MPLS L3VPN services and provide high security and guarantees reliable QoS for VPN services.
- Overview of MPLS TE
- Understanding MPLS TE
- Application Scenarios for MPLS TE
- Summary of MPLS TE Configuration Tasks
- Licensing Requirements and Limitations for MPLS TE
- Default Settings for MPLS TE
- Configuring a Dynamic MPLS TE Tunnel
- Importing Traffic to an MPLS TE Tunnel
- Adjusting RSVP-TE Signaling Parameters
- Adjusting the Path of a CR-LSP
- Adjusting the Establishment of an MPLS TE Tunnel
- Configuring CR-LSP Backup
- Configuring Manual TE FRR
- Configuring Auto TE FRR
- Configuring Dynamic BFD for RSVP
- Configuring Static BFD for CR-LSPs
- Maintaining MPLS TE
- Configuration Examples for MPLS TE