Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring CR-LSP Hop Limit
Context
The hop limit is a condition for CR-LSP path selection and is used to specify the number of hops along a CR-LSP to be set up.
Perform the following configurations on the ingress node of an MPLS TE tunnel.
Procedure
- Run system-view
The system view is displayed.
- Run interface tunnel interface-number
The tunnel interface view of the MPLS TE tunnel is displayed.
- Run mpls te hop-limit hop-limit-value [ best-effort | secondary ]
The number of hops along the CR-LSP is set. The hop-limit-value is an integer ranging from 1 to 32.
- Run commit
The configuration is committed.