Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of Adjusting RSVP-TE Signaling Parameters
Procedure
- Run the display mpls rsvp-te command to check related information about RSVP-TE.
- Run the display default-parameter mpls rsvp-te command to check default parameters of RSVP-TE.
- Run the display mpls rsvp-te session ingress-lsr-id tunnel-id egress-lsr-id command to check information about the specified RSVP session.
- Run the display mpls rsvp-te psb-content [ ingress-lsr-id tunnel-id lsp-id ] command to check information about RSVP-TE PSB.
- Run the display mpls rsvp-te rsb-content [ ingress-lsr-id tunnel-id lsp-id ] command to check information about RSVP-TE RSB.
- Run the display mpls rsvp-te statistics { global | interface [ interface-type interface-number ] } command to check RSVP-TE statistics.
- Run the display mpls rsvp-te peer [ interface interface-type interface-number ] command to view information about the RSVP neighbor on an RSVP-TE-enabled interface.