Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Route Record and Label Record
Context
By configuring route record and label record, you can determine whether to record routes and labels during the establishment of an RSVP-TE tunnel.
Perform the following configurations on the ingress node of an MPLS TE tunnel.
Procedure
- Run system-view
The system view is displayed.
- Run interface tunnel interface-number
The tunnel interface view of the MPLS TE tunnel is displayed.
- Run mpls te record-route [ label ]
The route and label are recorded when establishing the tunnel.
By default, routes and labels are not recorded.
- Run commit
The configuration is committed.