Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring LDP Loop Detection
Context
The device does not support LDP loop detection. If the neighbor of a node supports loop detection and requires the same loop detection function on both ends of an LDP session, configure LDP loop detection on the local node to ensure the establishment of an LDP session.
Procedure
- Run system-view
The system view is displayed.
- Run mpls ldp
The MPLS LDP view is displayed.
- Run loop-detect
The device is enabled to advertise the look detection capability during initialization of LDP sessions.
By default, a device does not advertise loop detection capability during initialization of LDP sessions.
- Run commit
The configuration is committed.