Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MPLS TE Auto FRR Configuration
Procedure
- Run the display mpls te tunnel name tunnel-name verbose command to check the binding of a primary tunnel and an automatic bypass tunnel.
- Run the display mpls te tunnel-interface command to check detailed information about an automatic bypass tunnel.
- Run the display mpls te tunnel path command to check information about paths of a primary or bypass tunnel.