Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing Traffic to an MPLS TE Tunnel
An MPLS TE tunnel does not automatically direct traffic. To enable traffic to travel along an MPLS TE tunnel, you need to use some method to direct traffic to the MPLS TE tunnel.
Pre-configuration Tasks
Before importing traffic to an MPLS TE tunnel, complete the following tasks:
- Configure a dynamic MPLS TE tunnel. For details, see Configuring a Dynamic MPLS TE Tunnel.