Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a TE FRR Scanning Timer
Context
A TE FRR-enabled device periodically refreshes the binding between a bypass CR-LSP and a primary LSP at a specified interval. The PLR searches for the optimal TE bypass CR-LSP and binds it to a primary CR-LSP. A TE FRR scanning timer is set to determine the interval at which the binding between a bypass CR-LSP and a primary CR-LSP is refreshed.
Perform the following configurations on the PLR.
Procedure
- Run system-view
The system view is displayed.
- Run mpls
The MPLS view is displayed.
- Run mpls te timer fast-reroute [ weight ]
Set the interval at which the binding between a bypass CR-LSP and a primary CR-LSP is refreshed.
By default, the interval is 1000 milliseconds (1 second), at which the binding between a bypass CR-LSP and a primary LSP is refreshed.
- Run commit
The configuration is committed.