Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a T/H Sensor
Procedure
- Determine the position for installing the T/H sensor.
- Take the T/H sensor out of the ESD bag.
- Split the T/H sensor into two parts: base and body.Figure 5-8 BaseFigure 5-9 Body
- Install the sensor body onto the base.
Ensure that the sensor body snaps into place.
Figure 5-10 Installing a T/H sensor - Connect all cables to the T/H sensor.
- Reset the DIP switch for the new T/H sensor.Figure 5-11 Positions of T/H sensorsTable 5-1 Mapping between the position number and the DIP address
Position Number
DIP Address
T/H sensor 1
00000001
T/H sensor 2
00000010
T/H sensor 3
00000011
T/H sensor 4
00000100
T/H sensor 5
00000101
T/H sensor 6
00000110
T/H sensor 7
00000111
