Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a One-Way Valve
Procedure
- Determine the position for installing a one-way valve.
- One-way valves are installed on the water outlet side of the manifold, and the arrows on one-way valves should be directed to the water flow.
- The one-way valve and solenoid valve must be used together.
- Take a one-way valve out of the ESD bag.
- (Optional) Use a torque wrench to tighten the one-way valve.Figure 5-23 Install the one-way valve.
- Open the ball valve for the secondary side and manifold water outlet pipe.
