Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Unloading the Equipment
Unload the equipment based on the vehicle type after the equipment is transported to the site.
Table 3-1 Unloading mode
Vehicle Type |
Recommended Unloading Method |
Reference |
|---|---|---|
Vehicle with a tailboard |
Use a pallet truck and the tailboard to unload the equipment. |
For details, see Pallet Truck. |
Vehicle without a tailboard |
Use a forklift to unload the equipment. |
For details, see Forklift. |
Tools
Ensure that the tools are available before the equipment is unloaded:
- Crane
- Rope
- (Optional) Forklift
- (Optional) Pallet truck
- Protective gloves
Pallet Truck
Figure 3-2 shows how to use a pallet truck and the tailboard to unload the equipment.
Precautions:
- Lower the fork of the pallet truck, insert the fork into the middle gap of the package tray, and then raise the fork slowly.
- Drive a pallet truck at an even speed. Do not stop it suddenly.
Forklift
Figure 3-3 shows how to use a forklift to unload the equipment.
Precautions:
- The driver must obtain the qualification certificate approved by the local government or authority.
- Ensure that no person stands in front of the forklift before driving it.Figure 3-4 Avoid standing in the front the forklift
- Adjust the forks of the forklift so that they are in the middle of the lower surface of the pallet to prevent damaging the equipment.Figure 3-5 Avoid damaging the equipment
- Lower and raise all loads (especially heavy loads) slowly and stop them gently.
