Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Door Status Sensor
Procedure
- Determine the position of the door status sensor to be removed.
- Disconnect the cable between the door status sensor and the CCU.
- Remove the cover of the door status sensor, as shown by (1) in Figure 5-13.
- Use a Phillips screwdriver to loosen the two screws that secure the door status sensor, as shown by (2) in Figure 5-13.
- Remove the door status sensor.
- Place the removed door status sensor in an ESD bag.
