Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Door Status Sensor
Procedure
- Determine the position for installing the door status sensor.
- Take the door status sensor out of the ESD bag.
- Remove the cover of the door status sensor.
- Use two Phillips screws to secure the door status sensor to the cabinet door, as shown by (1) in Figure 5-15.
- Connect the cable to the door status sensor.
- Close the cover of the door status sensor, as shown by (2) in Figure 5-15.
