Installing the Liquid-Cooled Chassis
Precautions
You must wear protective gloves to prevent injury during operations.
Procedure
- Open the front door to a 90 degree position.
- Remove the shock-absorbing materials inside the cabinet.
- Lift the server. This task requires at least two persons.
If the installation position of the device is higher than the shoulders of the installation personnel, use a vehicle such as a lift to facilitate installation. Prevent the equipment from falling down and causing personal injury or damage to the equipment.
- Install the liquid-cooled cabinet.
For details, see the FusionServer Pro 2288C V5 Server User Guide.
- Close the front door and connect the ground cable to it. Figure 3-47 Connecting the ground cable