Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Host
This operation enables you to add a host to a host group. You can add a maximum of 64 hosts to a host group, and you can add a host to a maximum of 64 host groups.
Procedure
- Log in to DeviceManager.
- Choose
Provisioning >
Host > Host Group.
- Add a host.
- Select the host group that you want to add a host to.
- Click Add Host.
The Add Host to Host Group dialog box is displayed.
- Select the host that you want to add.
If hosts to be added into the host group belong to different clusters, data access conflict may occur and cause data loss. Before performing this operation, you are advised to install cluster software to manage hosts.
- Click
to add the host to the Selected Hosts area.
- Confirm your operation.
- Click OK.
The Execution Result dialog box is displayed, indicating that the operation succeeded.
- Click Close.
- Click OK.
Provisioning > 
Host > Host Group.
to add the host to the Selected Hosts area.