Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Process
Figure 4-1 shows the process for configuring storage space.
In service scenarios where only IP SAN is used on the OceanStor 2800 series storage systems, run the change vm_container general container_id=? cpu_isolate_enable=no command to disable physical CPU allocation to VMs in developer mode to improve storage system performance. In the command, container_id indicates the VM container ID. For details about how to use this command, see Advanced O&M Command Reference.