Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Naming an iSCSI Device and an iSCSI Initiator
An iSCSI device name or iSCSI initiator name contains the default part and user-defined part. Only the user-defined part can be modified. An iSCSI target name is dynamically generated based on the iSCSI device name and identifier of a specific port. For details about how an iSCSI target name is generated, contact maintenance personnel for your site.
Procedure
- Log in to DeviceManager.
- Choose
Settings >
Storage Settings > Block Storage Service > Name Settings.
- In iSCSI Device Name, enter the user-defined part of the iSCSI device name.
The user-defined part can be left blank or contain up to 31 characters.
- In iSCSI Initiator Name, enter the user-defined part of the iSCSI initiator name.
The user-defined part can be left blank or contain up to 31 characters.
- Click Save.
The Execution Result dialog box is displayed, indicating that the operation succeeded.
- Click Close.
Settings > 
Storage Settings > Block Storage Service > Name Settings.