Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the General Properties of the Snapshot of a LUN in an Application
This operation allows you to view the general properties of a snapshot and modify its name and description.
Prerequisites
At least one application-based snapshot has been created in the system.
Procedure
- Log in to DeviceManager.
- Choose
Data Protection >
Snapshot > LUN Group/Application.
- From the drop-down list in the upper area of the function pane, select an application type.
- In the upper area of the function pane, select an application-based snapshot.
- In the lower area of the function pane, select the snapshot of a LUN and click Properties on the menu bar.
The Properties of Snapshot dialog box is displayed.
- Modify the general properties of the snapshot.
- Click the General tab.
- Modify the general properties of the snapshot.
Table 5-7 describes the related parameters.
Table 5-7 General properties of a snapshotParameter
Description
Example Value
Name
Name of a snapshot.
- The name must be unique.
- The name contains letters, digits, underscores (_), periods (.), and hyphens (-).
- The name contains 1 to 31 characters.
ExchangeApp_001_Snap_001_1
Description
Description of a snapshot.
-
- Click OK.
The Execution Result dialog box is displayed, indicating the operation result.
- Click Close.
Data Protection > 
Snapshot > LUN Group/Application.