Viewing Snapshot Information

Prerequisites

At least one snapshot has been created on the storage system.

Procedure

1. Log in to DeviceManager.
2. Choose Data Protection > Snapshot > LUN.
3. View the information about the snapshots in the list.

   Table 3-1 describes the related parameters.

   Table 3-1 Snapshot parameters

   Parameter	Description	Example Value
   Name	Name of a snapshot. The name must be unique. The name contains letters, digits, underscores (_), periods (.), and hyphens (-). The name contains 1 to 31 characters.	Snapshot001
   ID	ID of a snapshot. NOTE: After clicking and selecting this parameter, you can view this parameter in the snapshots list.	2
   Health Status	Indicates whether a snapshot is normal. The possible value can be Normal or Fault.	Normal
   Running Status	Indicates whether a snapshot is working properly. The possible value can be Activated, Rolling back, or Unactivated.	Activated
   Source LUN Name	Name of the source LUN of a snapshot. A source LUN is a LUN where source data resides.	lun005
   Source LUN ID	ID of the source LUN of a snapshot. NOTE: After clicking and selecting this parameter, you can view this parameter in the snapshots list.	2
   Snapshot Capacity	The same as the capacity of the source LUN of a snapshot.	1.000 GB
   Number of Source LUN Sectors	Number of the sectors in the source LUN.	2079152
   Allocated Capacity	Storage pool capacity allocated to a snapshot. After the snapshot is activated, the capacity includes the data capacity and metadata capacity of the writable snapshot (excluding the data protection capacity of the source LUN). The metadata capacity occupies about 1% of the data capacity.	256 MB
   Activated At	Time when a snapshot is activated.	2013-11-16 14:12:25 UTC+08:00
   Mapping	Indicates whether a snapshot is mapped to a mapping view. The possible value can be Mapped or Unmapped.	Unmapped
   WWN	World Wide Name (WWN) of a snapshot. NOTE: After clicking and selecting this parameter, you can view this parameter in the snapshots list.	210235G6LLZ0B8000008
   Rollback Start Time	Time when a snapshot rollback is started. NOTE: After clicking and selecting this parameter, you can view this parameter in the snapshots list.	2014-05-30 10:15:25 UTC+08:00 NOTE: If a snapshot is not involved in a rollback, the value of this parameter is --.
   Rollback End Time	Time when a snapshot rollback is completed. NOTE: After clicking and selecting this parameter, you can view this parameter in the snapshots list.	2014-05-30 10:15:45 UTC+08:00 NOTE: If a snapshot is not involved in a rollback, the value of this parameter is --.
   Rollback Speed	Rate at which a snapshot is rolled back. The possible value can be Low, Medium, High, or Highest. NOTE: After clicking and selecting this parameter, you can view this parameter in the snapshots list.	High NOTE: If a snapshot is not involved in a rollback, the value of this parameter is --.
   vStore Name	Name of the vStore to which the snapshot belongs.	-- NOTE: The details are displayed only when the snapshot is created in the vStore view. If the snapshot is created in the system view, the value of this parameter is --.
   vStore ID	ID of the vStore to which the snapshot belongs.	-- NOTE: The details are displayed only when the snapshot is created in the vStore view. If the snapshot is created in the system view, the value of this parameter is --.