Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing the Owning LUN Group of the Snapshot of a LUN in an Application
This operation enables you to view the name and ID of a snapshot's owning LUN group.
Prerequisites
At least one application-based snapshot has been created in the system.
Procedure
- Log in to DeviceManager.
- Choose
Data Protection >
Snapshot > LUN Group/Application.
- From the drop-down list in the upper area of the function pane, select an application type.
- In the upper area of the function pane, select an application-based snapshot.
- In the lower area of the function pane, select the snapshot of a LUN and click Properties on the menu bar.
The Properties of Snapshot dialog box is displayed.
- View the owning LUN group of the snapshot.
- Click the Owning LUN Group tab.
- View the properties of the owning LUN group.
Table 5-8 describes the related parameters.
- Click OK.
Data Protection > 
Snapshot > LUN Group/Application.