Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SmartIO Interface Module
Function
SmartIO interface modules support four 10 Gbit/s optical modules.
The ETH optical module does not support auto-negotiation.
Ports
Figure 4-30 shows the appearance of a 10 Gbit/s SmartIO interface module. FE in the label indicates front-end.
Indicators
Table1 Indicator status description for a SmartIO interface module describes the states of indicators and their meanings on a SmartIO interface module after the storage system is powered on.
Table 4-19 Indicator status description for a SmartIO interface module
Indicator |
Status Description |
|---|---|
Module Power indicator |
|
Port Link/Active/Mode indicator |
|