Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Name of a File System Snapshot
This section describes how to modify the name of a file system snapshot.
Prerequisites
A file system snapshot has been created.
Procedure
- Choose Data Protection > Protection Entities > File Systems > Snapshots.
- Select the vStore to which the desired file system belongs from the vStore drop-down list in the upper left corner.
- Select a file system, click More on the right of the desired snapshot, and select Modify.
The Modify Snapshot page is displayed on the right.
Alternatively, perform either of the following operations to go to the Modify Snapshot page:
- Click the name of the desired snapshot. In the upper right corner of the page that is displayed, click Operation and select Modify.
- Choose Services > File Service > File Systems. Click the name of the desired file system. On the page that is displayed, click the Protection tab and select Snapshot from the drop-down list. Click More on the right of the desired snapshot and select Modify.
- Choose Data Protection > Protection Entities > File Systems > File Systems.
- Click the name of the desired file system. On the page that is displayed, click the Protection tab and select Snapshot from the drop-down list. Click More on the right of the desired snapshot and select Modify.
- Click the value in the Snapshots column of the desired file system if the value is not 0. On the Protection tab page, select Snapshot from the drop-down list. Click More on the right of the desired snapshot and select Modify.
- Set the snapshot name.
- The name must be unique.
- The name contains only letters, digits, underscores (_), and hyphens (-).
- The name contains 1 to 255 characters.
- Set the snapshot description.
The value contains 0 to 1023 characters.
- Click OK.
