Configuring a Network Plan
Context
iMaster NCE-Campus enables users to plan a network topology online. It can automatically import device topology information (including device, card, and link information) based on the template. With iMaster NCE-Campus, device information can be imported in batches and the network topology can be displayed.
The network plan import function can be used to create links and add devices and stacks at a site.
If aggregation or access switches are deployed in such a way that preset network plan data of the switches is imported to the site before they are brought online on the controller, you need to enable Eth-Trunk auto-negotiation on the pre-configured Eth-Trunk interface after the Eth-Trunk information is imported to the site using the network plan import template. This is to ensure that the switches connected to the Eth-Trunk interface can go online normally. To view the preconfigured Eth-Trunk interface on iMaster NCE-Campus, choose Provision > Physical Network > Site Configuration > Site > Switch > Interface.
Configuration Tasks
Task Description |
Deployment Procedure |
|---|---|
Configuring a network plan |
|
Viewing the device topology |