Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Physical Link
Context
Common physical links can be automatically discovered using Link Layer Discovery Protocol (LLDP). In link aggregation scenarios, you need to create Eth-Trunks manually. Currently, you can create Eth-Trunks in either of the following ways:
- During network plan configuration, you can create Eth-Trunks in batches by importing a template. This configuration mode is recommended for large- and medium-sized campus networks.
- Select the devices to be configured at a site and manually create an Eth-Trunk. This mode applies to large- and medium-sized campus networks if the interconnected devices do not support template-based import.
Configuration Tasks
Task Description |
Deployment Procedure |
|---|---|
Creating an Eth-Trunk |