Context
In the virtualization solution for a large or midsize campus network, authentication control points are configured during access management configuration for the fabric. During the configuration, the required authentication templates to be bound need to be planned and designed in advance. The authentication templates configured on iMaster NCE-Campus include the RADIUS server template, Portal server template, and user authentication profile.
Configuration Tasks
Description
|
Operation Procedure
|
Creating a RADIUS server template
|
- Select a RADIUS server type. The built-in RADIUS server of iMaster NCE-Campus is recommended.
- Configure the IP address of the RADIUS server. You do not need to configure an IP address if the built-in RADIUS server of iMaster NCE-Campus is used.
|
Creating a Portal server template
|
- Select the Portal server type. The built-in Portal server of iMaster NCE-Campus is recommended.
- Configure the IP address of the Portal server. You do not need to configure an IP address if the built-in Portal server of iMaster NCE-Campus is used.
- Configure the URL of the Portal server. You do not need to configure a URL if the built-in Portal server of iMaster NCE-Campus is used.
|
Creating a user authentication profile
|
- Select a user authentication mode, which can be 802.1X authentication, MAC address authentication, or Portal authentication. A profile can contain multiple authentication modes.
- Select the RADIUS server template or Portal server template to be bound.
|
Reference Links for iMaster NCE-Campus Operations