Configuring Basic Network O&M

Configuring interconnection between network devices and an SNMP server

Enable the SNMP function for the site.

1. Configure the SNMP version. If SNMPv1 or SNMPv2 is used, you need to configure an SNMP read community name. If SNMPv3 is used, you need to configure a user list.
2. Configure the SNMP server address whitelist.

Configuring interconnection between network devices and an NTP server

Enable the NTP function for the site.

1. Set a time zone.
2. Configure the IP address of the NTP server.

Configuring network device logs to be uploaded to a syslog server (interconnection between network devices and the syslog server)

Configure interconnection between network devices and a syslog server. For details, see "O&M > Maintenance and Monitoring > Tenant Administrator O&M > Third-Party Server Configuration > Configuring Devices to Report Logs to the Syslog Center" in the iMaster NCE-Campus Product Documentation.

1. Configure the IP address and port number of the syslog server.
2. Select the network site where logs need to be reported.

Configuring network device logs to be uploaded to a syslog server (interconnection between iMaster NCE-Campus and the syslog server)

Configure interconnection between iMaster NCE-Campus and a syslog server. For details, see "O&M > Maintenance and Monitoring > Tenant Administrator O&M > Third-Party Server Configuration > Connecting to the Syslog Server > Configuring the Syslog Server" in the iMaster NCE-Campus Product Documentation.

1. Import the trusted certificates of the syslog server.
2. Set parameters for interconnecting with the syslog server.
3. Select the types of logs to be reported.

Configuring a local account for user login over SSH

Configure a local account for user login over SSH and the corresponding user name and password for the site.

Configuring LLDP

Enable the LLDP function for the site. The LLDP function is enabled on iMaster NCE-Campus by default for obtaining the physical network topology information.