Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring APs to Join the WAC
In the distributed gateway solution, if VXLAN is deployed across core and aggregation layers for the fabric and the edge node functions as the native WAC, an AP establishes a CAPWAP tunnel with the edge node through the management VLAN for policy association, and then goes online on the edge node. The policy association function is configured during access management configuration (Configuring Access Management).
Before configuring APs to join WACs, configure the association relationship between them on iMaster NCE-Campus so that APs can only join their given WACs.