Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Physical Links
Context
Common physical links can be automatically discovered using Link Layer Discovery Protocol (LLDP). In link aggregation scenarios, you need to create Eth-Trunks manually. Currently, you can create Eth-Trunks in either of the following ways:
- Select the devices to be configured at a site and manually create an Eth-Trunk.
- During network plan configuration (for details, see Configuring a Network Plan), you can create Eth-Trunks in batches by importing a template. Currently, this mode is applicable only to Eth-Trunks between switches.
Configuration Tasks
Description |
Operation Procedure |
|---|---|
Creating an Eth-Trunk |
|