Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Mask a Specified Alarm?
Question
How do I mask a specified alarm?
Answer
Users with operation permissions for Alarm Settings can specify the alarms to be masked in alarm masking rules. The following describes how to mask The license will expire.
- Choose from the main menu.
- In the navigation pane, choose Masking Rules.
- On the Masking Rules page, click Create and select Alarm Masking Rules.
- In the Basic Information area, set the rule name, description, and whether to enable the rule.
- In the Conditions area, select Designated alarms for Alarms and click Add Alarm.
- In the Available area on the left of the Add Alarm dialog box that is displayed, enter The license will expire, and click
.
- In the search result list, select the alarms to be masked and click
to place them in the Selected list. Click OK.
- On the page for creating a masking rule, click OK. The system will mask the alarm: The license will expire.
.
to place them in the Selected list. Click OK.