Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deployment Process
Logically, networks in the EVPN Interconnection Solution can be divided into three layers from bottom to top: physical network (underlay network) layer, virtual network (overlay network) layer, and service policy layer. During network planning and deployment, configure the physical network, deploy the virtual network, and then deploy service policies based on service requirements. You can refer to the deployment process in the following figure to deploy the EVPN Interconnection Solution.
Figure 4-1 Deployment process of the EVPN Interconnection Solution
![]()
