Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Traffic Policies and Security Policies
- Configure SAC and enable application identification.
- Choose .
- Click
next to Application identification in the Operation column.
- Set Configuration to Enable.
- Set Application scope.
- Click OK.
- Configure an application group.
- Choose .
- Click Create.
- Enter the application group name and description, and select applications.
- Click OK.
- Configure a traffic classifier.
- Choose .
- Click Traffic Classifier Template. Then click Create and create a traffic classifier.
- Configure a traffic classification rule.
- Click OK.
next to 
- Configure Internet access policies for the overlay network.
- Choose .
- Click the Overlay tab.
- Set VN to VN-test.
- Click the Site-to-Internet tab and set Local Internet access to
.
- Click Create and select the site to which a local Internet access policy needs to be delivered.
- Click Next.
- Configure a local Internet access policy according to Table 5-20.
- Click Apply.
- Configure an intelligent traffic steering policy for the overlay network.
- Choose .
- Click the Overlay tab.
- Set VN to VN-test.
- Click the Intelligent Traffic Steering tab. On the page that is displayed, click Create and create an intelligent traffic steering policy.
- Click OK.
- In the policy list, click
in the Operation column. In the Attach Sites dialog box that is displayed, select the site to which you want to apply the policy and click
. Click OK.
- Select the policy to deliver, click Commit, and then click Commit Selected.
- In the Commit window that is displayed, set Effective Time to Immediately, and then click OK.
- Configure a QoS policy for the overlay network.
- Choose .
- Click the Overlay tab.
- Set VN to VN-test.
- Click the QoS tab. The Policy Settings page is displayed.
- Click Create and configure a QoS policy.
- Click OK.
- In the policy list, click
in the Operation column. In the Attach Sites dialog box that is displayed, select the site to which you want to apply the policy and click
. Click OK.
- Select the policy to deliver, click Commit, and then click Commit Selected.
- In the Commit window that is displayed, set Effective Time to Immediately, and then click OK.
- Configure a security policy.
- Choose .
- Click the URL tab and set VN to VN-test.
- Click Create and complete the security policy configuration.
- Click OK.
- In the policy list, click
in the Operation column. In the Attach Sites dialog box that is displayed, select the site to which you want to apply the policy and click
. Click OK.
- Select the policy to deliver, click Commit, and then click Commit Selected.
- In the Commit window that is displayed, set Effective Time to Immediately, and then click OK.
.
in the 
. Click 
in the 
. Click 
in the 
. Click 
