Onsite Acceptance Using the CloudCampus APP (Android)

Context

The Wi-Fi test function enables you to quickly test the Wi-Fi network in terms of Wi-Fi coverage, service experience, and network security. This function is applicable to tests that are independent of drawings. With this function, you can detect Wi-Fi at anytime and anywhere and export reports.

Procedure

1. Use a smartphone to access the Wi-Fi network.
2. Start the CloudCampus APP. Touch Home, and then touch GO under Wi-Fi Test. Single-point network acceptance is automatically enabled.

3. Touch View Details to view the details.

   You can search for help from technical support personnel to take proper measures to improve the network health of items with low scores.

4. Touch . On the History screen that is displayed, touch .
   • To export the test report, touch .
   • To compare test reports, touch .
   • To delete the selected test report, touch .

Context

The quick acceptance function allows you to perform Wi-Fi acceptance on a temporary floor plan. After you import the drawing to the CloudCampus APP and perform quick acceptance, the test result is displayed on the drawing and you can export the acceptance report in a Word file.

Procedure

1. Use a smartphone to access the Wi-Fi network.
2. Start the CloudCampus APP. Touch Tool, and then touch Acceptance..

3. Touch Quick Acceptance. On the screen that is displayed, touch New Task on the lower right corner. On the Upload Drawing screen, enter the drawing name.

   Touch Photo or Take Photo to select a drawing.

   Click to select test items. Touch Start test.

   Touch Photo to select a drawing from the local album. Touch Take Photo to start the camera to take a photo of the drawing. Currently, the drawing is mandatory.

   To modify an incorrect drawing, touch and import a correct one.

4. Touch points on the drawing. Select or to determine whether to pin points. Then start the point test.

   During the test, you can stop the test. The test result unqualified is displayed in red, and qualified in green.

5. After the test is complete, you can touch View Acceptance Details to view acceptance details.

   You can touch each test point to view its details. To continue the test, touch Continue Test.

6. Return to the Quick Acceptance screen. Touch Learn More, select a project, and touch Export Project or Export Report.

   To import a project, touch .

Context

In the entire area of a tenant site, select multiple points for sampling, analyze the data, and report the sampled point information to WLAN Planner. The CloudCampus APP only collects and reports information. Information query, processing, and report export operations can be performed only on WLAN Planner.

Network-wide acceptance needs to use a project on WLAN Planner on the ServiceTurbo platform. Therefore, you need to log in to ServiceTurbo for network-wide acceptance.

Procedure

1. Use a smartphone to access the Wi-Fi network.
2. Start the CloudCampus APP. Touch Tool, and then touch Acceptance..

3. Use the uniportal account to log in to ServiceTurbo.

4. Touch and select the online or offline pointing mode.

   In online mode, each pointing is uploaded to WLAN Planner. In offline mode, pointing data is saved locally, and you can upload the data to WLAN Planner later.

5. Select a project and touch to enable acceptance items as required.

6. At the network planning site, touch a point on the drawing and then touch to start testing acceptance items.

   Touch to select a building floor, and touch to display or hide the specified information or simulation diagram.

7. Move to another position and create another point for testing.

   After the test is complete, you can touch the point to view its details.

   Touch and hold a point. In the dialog box that is displayed, you can touch OK to delete the point.