Configuring Relevant Information for Authentication and Authorization
Configuring the SMS Server
By default, the system is pre-configured with the following SMS server connection parameters:
- fungo: http://qxt.fungo.cn/Recv_center. This is the SMS platform of fungo.cn (Beijing, China).
- twilio: https://api.twilio.com:8443/2010-04-01/Accounts/{USERNAME}/Messages.json. Visit www.twilio.com to apply for the SMS service if needed.
- Apply to the SMS carrier for the SMS service and obtain corresponding data including the account and password.
- Choose from the main menu, and then click the SMS Server tab.
- Select an SMS server template and enter related information.
- Set SMS template type to HTTP SMS Service, and SMS message template to fungo.
- Set SMS template type to HTTP SMS Service, and SMS message template to twilio.
- Set SMS template type to SMPP SMS Service, and select a created SMS template.
- Set SMS template type to HTTP SMS Service, and SMS message template to fungo.
- Click Test to verify validity of the SMS message sending function.
- If the test succeeds, a dialog box is displayed, indicating that the test is successful. In addition, your mobile phone receives a test SMS message from the system.
- If the test fails, a dialog box is displayed, indicating that you failed the test. Perform operations according to the scenarios:
- If an error code is displayed in the dialog box, check the product documentation of the SMS service provider for the cause of the error based on the error code, and obtain the troubleshooting method.
- If no error code is displayed in the dialog box, check whether the URL in the SMS template is correct and whether the SMS server is reachable.
- After the test is successful, click Save.
Configuring a Portal Page Push Policy
- Choose from the main menu, and then click the Portal Page Push Policy tab page.
- On the Portal Page Push Policy tab page, click Create. In the displayed page, set parameters according to Table 5-5, create a Portal page push policy, and click Apply.Table 5-5 Portal page pushing policy parameters
Parameter
Value
Name
test
Access Mode
Wireless
Push Rule
A specified page is pushed for the Portal authentication request that meets the push conditions.
If none of the push conditions is set, the same Portal page is pushed to all devices at the site. If multiple conditions are set, a Portal authentication request matches the Portal page push policy only when it meets all the push conditions.
Authentication mode
SMS authentication
Push page
The default page is used. If the default page cannot meet requirements, customize a new page as prompted.
Each set of the push page contains the authentication page, user notice page, and registration page. The tenant administrator can specify one of them as the first page to push.
First page to push
Authentication page
Page displayed after successful authentication
Do not switch to another page
