Configuring Cloud-Managed Devices to Connect to the Internet

Configure the gateway (cloud firewall) to connect to the Internet. Devices connected to the gateway obtain IP addresses dynamically through DHCP.

1. Use HTTPS to log in to the web page of the cloud firewall by referring to the connection and default configuration in the following figure.

2. Switch the operating mode to the cloud management mode. On the dashboard, click Configure next to Cloud Management Mode in the System Information area. In the dialog box that is displayed, select Enable and click OK. After this operation is performed, the system displays a message, indicating that the current configuration will be cleared and the cloud firewall will restart. After the cloud firewall restarts, it changes to the cloud management mode.

3. Set the mode in which the cloud firewall connects to the carrier network.
   1. Primary mode: Configure the gateway (cloud firewall) to connect to the Internet through Ethernet interfaces (PPPoE dialup) and set the Internet access parameters according to Table 5-3.
      Table 5-3 Parameters for configuring the gateway to access the Internet in PPPoE mode through GE0/0/3

      Parameter	Value
      Interface Name	GigabitEthernet0/0/3
      Zone	untrust
      Connection Type	PPPoE NOTE: The information in the preceding figure is for reference only.
      User name	Obtained from carrier A
      Password
      Online mode	Always online

   2. Secondary mode: Configure the gateway (cloud firewall) to connect to the Internet through Ethernet interfaces (PPPoE dialup) and set the Internet access parameters according to Table 5-4.
      Table 5-4 Parameters for configuring the gateway to access the Internet in PPPoE mode through GE0/0/4

      Parameter	Value
      Interface Name	GigabitEthernet0/0/4
      Zone	untrust
      Connection Type	PPPoE
      User name	Obtained from carrier B
      Password
      Online mode	Always online