About This Document
Purpose
This document describes the troubleshooting process of Huawei Atlas 500 AI edge station (model: 3000) (A500-3000 for short). You can perform routine maintenance by referring to this document. Routine maintenance covers log collection, alarm handling, fault symptom-based troubleshooting, and software upgrade.
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows:
Symbol |
Description |
|---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices, and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Command Conventions
Format |
Description |
|---|---|
Boldface |
The keywords of a command are in Boldface. |
Italic |
Command arguments are in Italic. |
[ ] |
Items in square brackets ([ ]) are optional. |
{ x | y | ... } |
Optional items are grouped in brackets and separated by vertical bars. One item must be selected. |
[ x | y | ... ] |
Optional items are grouped in brackets and separated by vertical bars. One item or no item is selected. |
{ x | y | ... }* |
Optional items are grouped in brackets and separated by vertical bars. A minimum of one or a maximum of all can be selected. |
[ x | y | ... ]* |
Optional items are grouped in brackets ([]) and separated by vertical bars (|). Several items or no item is selected. |
&<1-n> |
This parameter before the & sign can be repeated 1 to n times. |
# |
Lines starting with the number sign (#) are comments. |
Change History
Issue |
Date |
Description |
|---|---|---|
07 |
2022-12-09 |
This issue is the seventh official release. Changed the Atlas 500 AI Edge Station to Atlas 500 AI edge station (model: 3000) (A500-3000 for short). |
06 |
2022-02-22 |
This issue is the sixth official release. Optimized the default data. |
05 |
2021-05-11 |
This issue is the fifth official release. Updated document links in Preparing for Troubleshooting. |
04 |
2021-01-25 |
This issue is the fourth official release. Modified the following content: |
03 |
2020-10-26 |
This issue is the third official release. Updated Restoring Factory Settings. |
02 |
2020-09-08 |
This issue is the second official release. Updated Restoring Factory Settings. |
01 |
2020-05-26 |
This issue is the first official release. |