Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PCIe Card on a Riser Module
Removing a PCIe Card from a Riser Module
- Wear an ESD wrist strap. For details, see ESD Protection.
- Power off the device. For details, see Powering Off the Server.
- Remove the power cables and all signal cables.
- Remove the device. For details, see Removing the Device and Guide Rails.
- Remove the chassis cover. For details, see Chassis Cover.
- Remove the riser module where the PCIe card to be removed resides. For details, see Riser Modules.
- Open the PCIe card latch. See (1) in Figure 5-59.
- Pull out the PCIe card. See (2) in Figure 5-59.
- Place the removed PCIe card in an ESD bag.
- If a new PCIe card is not installed immediately, install a filler panel. See (1) and (2) in Figure 5-60.
- Install the riser module. For details, see Riser Modules.
Installing a PCIe Card on a Riser Module
- Remove the riser module where the PCIe card is to be installed. For details, see Riser Modules.
- Remove the PCIe card filler panel from the riser module. See Figure 5-61.
- Take a spare PCIe card out of its ESD bag.
- Insert the PCIe card into a PCIe slot. See (1) in Figure 5-62.
- Close the latch. See (2) in Figure 5-62.
- Install the riser module. For details, see Riser Modules.
- Install the chassis cover. For details, see Chassis Cover.
- Install the device. For details, see Installing the Device and Guide Rails.
- Connect the power cables and all signal cables.
- Power on the device. For details, see Powering On the Server.
- Log in to the iBMC WebUI, and check whether the new component is normal. For details, see the Atlas 800 AI Training Server iBMC Alarm Handling (Models 9000).
