Safety Symbols on Devices

Warning

This label indicates that wrong operations may cause device damage or human injury.

External grounding

This label indicates grounding of external devices. One end of the ground cable must connect to the device, and the other end to a ground point. This ensures normal running of the devices and the safety of the operator.

Internal grounding

This label indicates grounding of internal devices. The terminals of the ground cable are connected to different components of the same device. This ensures normal running of the devices and the safety of the operator.

ESD label

This label indicates a static sensitive area. Do not touch the device with your hands. When operating the device within this area, take electrostatic discharge (ESD)-preventive measures. For example, wear an ESD wrist strap.

Altitude

This label indicates that the device operates properly at an altitude of 2000 m or lower. The symbol applies only to CCC.

Warning

This label indicates that a pallet truck or at least four people are required for moving the device.

Warning

This label indicates hazardous moving parts. Do not touch the fans when they are rotating.

High touch current

This label indicates that the device has high touch current and must be grounded before powering it on.

No stacking

Do not stack after unpacking. This may cause device damage.

No handling

Do not carry the device using its handle. This may cause injury or damage.

Multiple inputs

This label indicates that the device has multiple power inputs. Disconnect all power inputs before you power off the device.