Logging In to the iBMC WebUI
The following uses Internet Explorer 11.0 as an example.
For details about PC system configuration requirements, see Atlas 800 Training Server iBMC (V3.01.00.00 or Later) User Guide (Model 9000).
- Connect the local PC to the iBMC management network port on the device using a crossover cable or twisted pair cable.
Figure 7-4 shows the network diagram.
- Open Internet Explorer on the local PC.
- In the address box, enter the iBMC address in the format:
https://IP address of the iBMC management network port on the device
Example: https://192.168.2.100
- Press Enter.
The iBMC login page is displayed, as shown in Figure 7-5.
- If the message "There is a problem with this website's security certificate" is displayed, click Continue to this website (not recommended).
- If the system displays the Security Alert dialog box indicating a certificate error, click Yes.
- On the login page, enter the user name and password.
For details about the default user name and password of the iBMC system, see Atlas Hardware Product User List.
If the account is locked due to five consecutive failed attempts, try again in 5 minutes.
- In the Domain drop-down list, select Local iBMC or Automatic matching.
- Click Log In.
If the login is successful, the Home page is displayed. You can see the login user name by moving the cursor to
in the upper right corner of the page.