Rear Panel Indicators

GE electrical port/Management network port

Data transmission status indicator

• Blinking yellow: Data is being transmitted.
• Off: No data is being transmitted.

Connection status indicator

• Steady green: The network port is properly connected.
• Off: The network port is not connected.

2 x 100GE optical port

Transmission rate indicator

• Steady green: The data transmission rate is 100 Gbit/s.
• Off: The network port is not connected.

Connection status indicator

• Steady green: The network port is properly connected.
• Blinking green: Data is being transmitted.
• Off: The network port is not connected.

4 x 25GE/10GE optical port

Transmission rate indicator

• Steady green: The data transmission rate is 25 Gbit/s.
• Steady yellow: The data transmission rate is 10 Gbit/s.
• Off: The network port is not connected.

Connection status indicator

• Steady green: The network port is properly connected.
• Blinking green: Data is being transmitted.
• Off: The network port is not connected.

UID indicator

The UID indicator helps identify and locate a device.

• Off: The device is not being located.

• Blinking blue (blinking 255 seconds): The device has been located and is differentiated from other devices that have also been located.

• Steady blue: The device is being located.

PSU indicator

• Steady green: The power input and output are normal.
• Steady orange: The input is normal, but no power output is supplied due to overheat protection, overcurrent protection, short circuit protection, output overvoltage protection, or some component failures.
• Blinking green at 1 Hz:
  • The input is normal, and the device is standby.
  • The input is overvoltage or undervoltage. For details, see Atlas 800 AI Training Server iBMC Alarm Handling (Models 9000).
• Blinking green at 4 Hz: under online PSU firmware upgrade.
• Off: No power is supplied.