No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Front Panel Components
Front Panel Components
The following hard drive configurations are supported, which may vary from site to site.
Figure 2-1 shows the components on the front panel of the device with 5 x 2.5" drives.
Figure 2-1 Components on the front panel of the device with 5 x 2.5" drives
1
Drive
2
Drive filler
3
Fan modules
4
USB 3.0 port
5
VGA port
6
Label plate with an SN label
Figure 2-2 shows the components on the front panel of the device with 8 x 2.5" drives.
Figure 2-2 Components on the front panel of the device with 8 x 2.5" drives
1
Drive
2
Drive filler
3
Fan modules
4
USB 3.0 port
5
VGA port
6
Label plate with an SN label
Figure 2-3 shows the components on the front panel of the device with 10 x 2.5" drives.
Figure 2-3 Components on the front panel of the device with 10 x 2.5" drives
1
Drive
2
Fan module
3
USB 3.0 port
4
VGA port
5
Label plate with an SN label
-
-
Table 2-1 Description of ports on the front panel
Port
Type
Description
USB port
USB 3.0
Connects USB devices to the device.
NOTE:
Before connecting an external USB device, check that the USB device functions properly. The device may operate abnormally if an abnormal USB device is connected.
If an external USB device is used, the maximum length of the extension cable is 1 m.
VGA port
DB15
Used to connect to a monitor or a keyboard, video, and mouse (KVM).
NOTE:
The VGA port on the front panel does not have cable screws. As a result, the VGA cable is easy to fall off. You are advised to use the VGA port on the rear panel.
If the VGA ports on both the front and rear panels are connected, the VGA port on the front panel is used preferentially.